Three Sheets To The Wind?

This is the would-be water catcher, which should have been finished today. The sheets have not blown off.

I bought the right screws, and creocoted the posts and the roof supports, but when I looked again at the roof sheets I wasn't convinced they were the right ones. So I didn't fix them on.

The gap is just under 2m, which is how long the sheets are. This meant that on the exposed side the corrugated holes would let rainwater through.  The previous ones overhung by about 40 cms.

So I ordered some to be delivered in a few days, and returned the unwanted ones to B&Q. (One of their positives is a good returns policy.) Then I covered everything up and put the kettle on.

And the water catcher continues not to be one!  I'll Blip it when it's done.