Model Making - Day 13

I have now finished the pracical side of my model and now all I have left to do is the electronic and circuit part. The bit I have been dreading the most - as it is my weakest part do to.

I spent today wiring the whole circuit together having left the glue to dry overnight. I began my creating a trial circuit to determine if there was a voltage following through the circuit - which there was. I then used conductive tape and soldered the circuit together and fed it through the model. I then placed a magnet on top of the reed switch and EUREKA it worked and the LED lit up. I then tidied and neatened up the electronics to make it better looking as well as removing the tape and soldering it all up.