Transformation part 1

Started repairing the snow blower. First I removed the blade from the bent side, then Dad cut the most badly bent parts. I pushed the corner "gently" against a telephone pole stub to straighten the wing and it worked quite well. The cut was about 7 centimetres wide at widest after that though, so I made a cut below it with an angle grinder and tried to make the gap narrower. Still about three centimetres max though, so we'll have to figure out something.

In the last photo Jussi is checking the inside. Afterwards we removed the rotating parts to make room for welding from the inside. A lot to do left and it won't look good, but perhaps it will be usable.

Backblipped yesterday.