Update on the latest project.

     If you refer to my blip on the 1st Oct: I have now cut that in half as you can see in the above shot.
One of them I have glued together and the other is before. 
The extra shows them both glued and clamped together tightly. I have to leave these now for at least 24 hours so the glue sets hard.

     When I take the clamps off I will sand them with a 60 grit s/paper to remove the excess glue and bring all the strips level. 
I will then put them in the lathe and turn them to form the bases of the lamps. I will blip that later.

Hope you are enjoying your weekend. Take care.